CSDX1002 Intergrated Purification Glove Box

1.GLOVE BOX

Dimension：

1800mm*780mm*900mm

Material：

SUS 304, thickness 3mm

Glove opening：

φ220mm，Hard aluminum alloy material, after anti-corrosion treatment

Gloves：

PIERCAN made in USA; Gloves with a diameter of 8 inches and a thickness of 0.4mm are made of butyl rubber material

Window：

The inclined design of the operating surface is made of 10mm safety tempered glass, and the front window is pasted with a special customized ultra strong sealing ring, adopting a front door opening structure

Can maintain a certain positive and negative pressure (-12mbar to 12mbar) during use

The box is equipped with energy-saving lighting and anti reflective materials, which provide soft light and prevent visual fatigue

 One porous power supply terminal board is pre installed inside the box (power supply: 220V ± 10% 50Hz ± 10%)

  Set up 5 standard KF-40 interfaces on the back panel of the box for easy access to liquids, gases, signals, etc

⑥ There are two layers of storage boards inside the box, which have the function of adjusting the height up and down

Support

Including casters, with a height of 914mm. Castors have functions such as leveling, moving, and fixing

Leakage rate:

Hourly leakage rate of sealed box with controlled inert atmosphere ≤ 5X

Maximum leakage standard ≤ 0.05vol%/h

2. Transition chamber

1）Main chamber

Appearance：

Cylindrical (304 stainless steel), connected to the glove box, using manual and automatic air supply control

Dimension：

φ360mm*600mm

Right side operation, using gas spring door opening method, with sliding tray inside the transition compartment

Tray：

230 mm*595mm Can freely move left and right, with an extension depth of 361mm

Vacuum degree：

≤-0.1MPa Vacuum pressure gaugeWika made in GERMAN

2）Small chamber

Appearance：

Cylindrical (304 stainless steel), connected to glove box, controlled by manual valve

Dimension：

φ155mm*320mm，Single opening handle pressing

Vacuum degree：

≤-0.1MPa

3.Controling system

Method：

Including self diagnosis, power-off and self start characteristics, with pressure control and adaptive functions.

Automatic control, cycle control, password protection, and vacuum chamber control are displayed on LCD.

The control unit adopts a German SIEMENS touch screen, and the operation menu can be selected in Chinese/English

Pressure control:

Control the pressure of the box and transition chamber at a certain set value

Foot pedal:

Can control the pressure of the glove box and facilitate operation

4. Purification system

Purification ability:

O2、H2O<1ppm

Adjustment device:

Touch adjustment through PLC (heating, evacuation, purification, regeneration)

No need for human monitoring throughout the entire process

Working gas:

N2 or Ar(Gas circulation)

Circulating fan:

German Elektror imported high-speed variable frequency fan, flow rate 0-80m3/h

Microprocessor control

Pressure tested stainless steel device

Single purification column:

5KG German BASF deoxygenation material, capable of deoxygenation of 60L

5KG American UOP high-efficiency absorbent material, capable of removing 2kg of water

Purification valve:

Fully automatic electrically operated valve with modular design

Filter:

High efficiency filter using a 0.3 micron aperture filter screen that complies with HEPA standards

5. Regeneration system

Used for the reuse of purification systems to activate them;

Regeneration requires a mixture of N2/H2 or Ar/H2 gases, with H2 accounting for 5-10%

6. Display System

The control unit adopts a German SIEMENS touch screen, and the operation menu is in Chinese/English

7.Vacuum system

Automatic pneumatic electroplating board

The vacuum pump adopts Edwards RV12 vacuum pump from the UK.

Vacuum can be applied separately to the box and transition chamber, and individual control can be achieved at any time (customized project).

8. Water/oxygen analyzer

Water analyzer

Range：

0-1000ppm

Error range：

±1% ppm

Ambient temperature：

-10℃-50℃

Display：

PLC

Especially for lithium battery manufacturing and metal organic users, it can be cleaned and reused, avoiding the problem of one-time pollution and scrapping

Oxygen analyzer

Range：

0-1000ppm

Error range：

±1% ppm

Ambient temperature：

-10℃-50℃

Display：

PLC

The use of ZrO2 sensors avoids the problem of short lifespan and inability to be exposed to air in fuel cells